Solder Wire & Bar
11 products
Solder wire is used for hand soldering, rework and soldering robots, while solder bar is melted in wave and selective soldering pots. Both are defined by the alloy and, for wire, by the flux inside the core.
Products in this category
No-clean flux-cored solder wire NC600 and NC601 – residues can be left on the board after soldering.
Water-soluble flux-cored solder wire WS700 – active flux for fast wetting; residues are washed off with water.
SN63PB37 rosin core solder wire – leaded eutectic alloy with a low melting point, for applications where lead is still permitted.
Rosin-based flux RMA20 – liquid RMA flux for hand soldering and touch-up.
How to choose solder wire
Alloy: SAC305 and Sn99.3Cu0.7 are common lead-free choices; Sn63Pb37 is the classic leaded alloy.
Diameter: fine wire for small pads and fine-pitch work, thicker wire for terminals and large joints.
Flux type and content: no-clean if boards are not washed, water-soluble if they go through a cleaning process.
Need solder bar for a wave or selective soldering pot? Tell us the alloy and quantity and our team will check availability. See also solder paste and wave soldering machines.
Solder wire FAQ
What solder wire diameter should I use?
Thin wire, around 0.3 to 0.6 mm, suits small pads, fine-pitch components and rework. Thicker wire, around 0.8 to 1.2 mm, delivers more solder for terminals, connectors and larger joints. Soldering robots usually specify a diameter for their feeder.
Lead-free or leaded solder wire?
Lead-free alloys such as SAC305 or Sn99.3Cu0.7 are required for RoHS-compliant products. Leaded Sn63Pb37 melts at a lower temperature and wets easily, but it is only used where lead is still permitted.
What does no-clean flux-cored solder wire mean?
The flux inside the wire leaves a small amount of residue that is safe to leave on the board, so no cleaning is required. Water-soluble flux-cored wire is more active but its residue must be washed off with water.
Do you supply solder bar for wave soldering pots?
Tell us the alloy, quantity and bar size you need through a quote request or contact our team, and we will check availability and lead time.
