Description
JC-Q209 is a JIT ChemTech solvent defluxer for PCB and PCBA flux residue cleaning after lead-free soldering. It also cleans post-soldering fixtures and jigs. Low surface tension and strong rosin solvency remove residues quickly from under components and between leads, and the surface dries clean without water marks or white residue. Performance can be adjusted to your production process.
Key Features
- Low surface tension and strong penetration for fast cleaning
- Quickly dissolves post-soldering rosin flux residues
- Fast drying, no visible marks or white residue
- ODS-free and RoHS compliant
- Ultrasonic, spray or manual cleaning
Technical Specifications
| Item | Specification |
|---|---|
| Model | JC-Q209 |
| Type | Organic solvent cleaner |
| Appearance | Colorless, transparent liquid |
| Relative density (water = 1) | 1.38 ± 0.05 |
| Boiling point | 80.5 °C |
| Flash point | 59.5 °C |
| Viscosity (20 °C) | 0.4 mPa·s |
| Saturated vapor pressure (20 °C) | 30.55 kPa |
| Solubility | Insoluble in water; miscible with most organic solvents |
| Packaging | 25 kg / drum |
Instructions for Use
- Ultrasonic cleaning: choose a suitable frequency, temperature and time; immerse parts completely with adequate spacing; replace the bath periodically.
- Spray cleaning: adjust flow rate, spray pressure, temperature and time.
- Manual cleaning: brush with an anti-static brush dipped in the cleaner, then wipe with a lint-free cloth.
Safety & Storage
Low toxicity, but the vapor is irritating and has anesthetic effects — use with good ventilation and wear goggles and chemical-resistant gloves. Flash point 59.5 °C: keep away from heat and open flames. Incompatible with strong oxidizing and reducing agents, strong alkalis, aluminum and magnesium. Store sealed in a cool, ventilated place. See the MSDS for full details.
Applications
- Removing rosin flux residue from PCBA after reflow, wave or hand soldering
- Cleaning before conformal coating or inspection
- Cleaning post-soldering fixtures and jigs
For jigs and fixtures, see JC-Q100; for a water-based process, see JC-Q203. Automate PCBA cleaning with our cleaning machines.
Documents
Information is for reference; always follow the MSDS and verify suitability in your own process.




Reviews
There are no reviews yet.