Description
JC-Q100 is a JIT ChemTech solvent cleaner developed for lead-free soldering processes. It is designed for cleaning post-soldering jigs, fixtures and pallets, and for cleaning board surfaces after soldering. Its low surface tension lets it penetrate tight gaps, it dissolves rosin resins quickly, and it evaporates fast, leaving a clean surface without water marks or white residue. The formulation can be adjusted to suit your production process.
Key Features
- Low surface tension and strong penetration for fast, effective cleaning
- Strong solvency for rosin resins — quickly removes post-soldering flux residues
- Fast drying, no water marks or white residue
- Free from ozone-depleting substances (ODS) and RoHS-restricted substances
- Suitable for ultrasonic, spray and manual cleaning
Technical Specifications
| Item | Specification |
|---|---|
| Model | JC-Q100 |
| Type | Organic solvent cleaner |
| Appearance | Colorless, transparent liquid |
| Relative density (water = 1) | 0.78 ± 0.05 |
| Boiling point | 80.7 °C |
| Flash point | −18 °C |
| Solubility | Insoluble in water; miscible with most organic solvents |
| Packaging | 25 kg / drum |
Instructions for Use
- Ultrasonic cleaning: choose a suitable frequency, control the bath temperature and set the cleaning time for your parts. Fully immerse the parts with adequate spacing. Replace the bath periodically as residues build up.
- Spray cleaning: adjust flow rate, spray pressure, temperature and time to achieve the required result.
- Manual cleaning: apply with an anti-static brush, scrub, then wipe off dissolved residues with a lint-free cloth.
Safety & Storage
JC-Q100 has a flash point of −18 °C: keep away from sparks, open flames and heat sources, use with good exhaust ventilation and explosion-proof equipment where required. It has low toxicity but its vapor is irritating and has anesthetic effects — wear safety goggles and chemical-resistant gloves. Store sealed in a cool, ventilated place away from sunlight. See the MSDS for full details.
Applications
- Cleaning wave and selective soldering pallets, jigs and fixtures
- Removing rosin flux residues from PCB surfaces after soldering
- Maintenance cleaning of SMT and THT production tooling
Need a water-based alternative? See Water-Based Cleaner JC-Q203. For heavy flux on PCBA, see JC-Q209. Clean jigs automatically with our cleaning machines.
Documents
Information is for reference; always follow the MSDS and verify suitability in your own process.




Reviews
There are no reviews yet.